Everything you need for one 1-1/4" link end, matched and boxed under one part number. The 1.25" Rod End Kit pairs a Pro 8 Series 1" bore x 1-1/4-12 chromoly rod end with its jam nut, a 1-1/4-12 weld-in round bung and two 17-4 stainless high misalignment spacers sized to your bolt.
The rod end, jam nut and bung share one thread direction, and the spacers set a 3" stack height for maximum articulation. Built for 4-link and 3-link bars, trailing arms, panhard and track bars, and custom control arms. One kit builds one end of a link. For an adjustable link, order one Right Hand kit and one Left Hand kit.
· 4130 chromoly rod end body with corrosion resistant black coating
· Hard chrome plated 52100 steel ball with self-lubricating PTFE liner
· F1 fit: 6 ft-lb to 24 ft-lb no-load breakaway torque
· 17-4 stainless high misalignment spacers step the 1" bore down to a 3/4", 5/8", 9/16" or 1/2" bolt
· Thread-matched jam nut and weld-in bung, right hand or left hand
· 3" stack height: 1.375" ball plus two .813" spacers
· (1) Pro 8 Series Rod End, 1" bore x 1-1/4-12
· (1) Jam Nut, 1-1/4-12
· (1) Round Bung, 1-1/4-12
· (2) High Misalignment Spacers, 1" x your bolt size x .813"
Specifications
| Rod end | P8DMR16T-F1 (RH) · P8DML16T-F1 (LH) |
|---|---|
| Bore | 1.000" |
| Thread | 1-1/4-12 male |
| Head diameter | 2.950" ±.020 |
| Ball width | 1.375" |
| Center of bore to end of shank | 4.500" ±.020 |
| Thread length | 2.500" |
| Rod end materials | 4130 chromoly body, black coating · 52100 steel ball, hard chrome plated · PTFE liner |
| Breakaway torque (no-load) | 6 ft-lb to 24 ft-lb (F1) |
| Jam nut | D730RH-ZC (RH) · D730LH-ZC (LH) · 1-1/4-12, zinc plated, 1.812" to 1.875" across flats, .687" to .751" thick |
| Round bung | H2307401875 (RH) · H2307401875-LH (LH) · 1-1/4-12 internal thread, 1.498" weld pilot, fits 1-1/2" ID tube |
| Misalignment spacers | 1" pilot, 1.240" flange, .813" tall, 17-4 stainless |
| Stack height | 3.00" (1.375" ball + 2 x .813" spacers) |
Kit Part Numbers
| Kit | Thread | Bolt | Spacers |
|---|---|---|---|
| DIY-R003 | Right Hand | 3/4" | H99000812 |
| DIY-R004 | Right Hand | 5/8" | H98800812 |
| DIY-R005 | Right Hand | 9/16" | H98700812 |
| DIY-R006 | Right Hand | 1/2" | H98600812 |
| DIY-R007 | Left Hand | 3/4" | H99000812 |
| DIY-R008 | Left Hand | 5/8" | H98800812 |
| DIY-R009 | Left Hand | 9/16" | H98700812 |
| DIY-R010 | Left Hand | 1/2" | H98600812 |
Interchange / Cross-Reference
Rod end only. Same 1" bore, 1-1/4-12 thread, 2.950" head, 4.500" center to end and 2.500" thread length. Verify dimensions against the spec table above.
Why Probearing
- Probearing makes ball joints, bushings, rod ends, spherical bearings and related accessories designed specifically for the off-road market.
- The company is based in Lakeside, California: 10050 Marathon Pkwy, Suite 113, Lakeside CA 92040.
- Products carry a 1-year limited manufacturer warranty against defects in material and workmanship.
- Real people answer the phone and email: (619) 828-3570 · sales@probearing.com.
FAQ
Right hand or left hand kit?
Most adjustable links use one of each: a Right Hand kit on one end and a Left Hand kit on the other, so turning the tube changes the length without unbolting either end. The rod end, jam nut and bung in each kit all share the same thread direction.
Which bolt size should I pick?
Pick the bolt that goes through your mount. The rod end bore is 1", and the two spacers step it down to 3/4", 5/8", 9/16" or 1/2". Every option has the same 3" stack height.
What does 3" stack height mean?
It is the width of the assembled joint: the 1.375" ball plus a .813" spacer on each side, 3.00" total. Set your mounting tabs 3" apart.
What tube does the bung fit?
The round bung has a 1.498" weld pilot made for tube with a 1-1/2" inside diameter. Confirm your tube ID before welding.
Does the rod end need grease?
No. The PTFE liner is self-lubricating, so don't pack it with grease. Grease holds dirt and can shorten liner life.
What does F1 mean?
It is the torque fit. F1 is extremely tight, rated 6 ft-lb to 24 ft-lb no-load breakaway torque. The same rod end is also sold on its own in F2, moderately tight.
How does it go together?
Weld the bung into the tube. Thread the jam nut onto the rod end, then thread the rod end into the bung and set your length. Snug the jam nut against the bung. Slide a spacer into each side of the ball, flared end facing out toward the mounting tab.
Shipping, returns & warranty
Shipping
Ships within the US and internationally, mostly via UPS or USPS, and shipping is calculated at checkout. Orders over $500 require a signature. If a package arrives damaged or short, email sales@probearing.com with your order number and photos, keep all packaging, and don't install the parts.
Full policy: Shipping policy
Returns
Returns are accepted within 30 days, unused and in the original packaging, with the fees listed above.
Full policy: Refund policy
1-Year Limited Manufacturer Warranty
Covers defects in material and workmanship under normal use, for the original purchaser. Probearing will repair or replace at its discretion. Contact sales@probearing.com or (619) 828-3570 with proof of purchase.
Details: Warranty
Questions? Talk to a real person.
Email sales@probearing.com or call (619) 828-3570
Call (619) 828-3570Email sales@probearing.com